Table of Contents
Advertisement
Invacare® Ben NG Series
Pivot width
Maximum slope angle brake
In some configurations, the overall dimensions exceed
the recommended dimensions for a wheelchair.
11.2 Tyres
The ideal pressure depends on the tyre type:
Tyre
Solid tyre:
610 mm (24");
305 mm (12")
Pneumatic profiled tyre:
610 mm (24")
Solid tyre:
190 mm (7 1/2")
The compatibility of the tyres listed above depends
on the configuration and/or model of your
wheelchair.
In case of a tyre puncture consult a suitable
workshop (e.g. bike repair shop, bicycle dealer ...) to
have the tube replaced by a skilled person.
50
Ben NG Series
1090 to 1280 mm
9°
Max. pressure
-
-
-
4.5 bar
450 kPa
65 psi
-
-
-
The size of the tyre is mentioned on the sidewall of
the tyre. The change of appropriate tyres must be
carried out by a qualified technician.
CAUTION!
– The tyres pressure have to be equal in both
wheels to avoid a less driving comfort, to keep
the brakes efficiency and an easy propelling of
the wheelchair.
11.3 Materials
Frame/backrest tubes
Upholstery (seat and backrest)
Push handles
Plastic parts like brake handles,
clothes guards, foot plates,
armpads and parts of most
options
Folding mechanism / vertical
brace / clamping parts / castor
forks
Screws, washers and nuts
All materials used are protected against corrosion.
We use only REACH compliant materials and
components.
Aluminum, Steel
Foam PUR, Fabric Nylon
and Polyester
PVC
Thermoplastic (e.g.
PA, PP, ABS and PUR)
according to marking
on the parts
Aluminum, Steel
Steel
1551536-C
Advertisement
Table of Contents
