Table of Contents
Advertisement
All manuals and user guides at all-guides.com
CONTROLS
∞ DYNAMIC BASS BOOST (DBB)
–
to select a bass boost level or to
switch off bass boost.
§ OPEN
–
to open tape deck 2.
≥ TAPE DECK 2
• TAPE DECK 1
ª OPEN
–
to open tape deck 1.
º REPEAT
–
to repeat a CD track, a disc, or all
available discs.
⁄ MUTE
–
to switch off the sound temporarily.
¤ BALANCE L/R
–
to balance the sound level of the Front
Left and Right speakers.
‹ CENTER +/-
–
to adjust the sound level of the center
speaker.
› REAR +/-
–
to adjust the sound level of the
surround speakers.
fi TEST TONE
–
to check the sound level of the Front
Left, Front Right, Center and Surround
speakers.
fl SHUFFLE
–
to play all the available discs and their
tracks in random order.
12
pg 01-31/P75-P78/34-Eng
12
OPERATING THE SYSTEM
‡ SLEEP TIMER
–
to switch the system to standby mode
at a selected time.
° B
–
to switch the system to standby mode.
Important:
Before you operate the system,
complete the preparation procedures.
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the
system. When the system is switched
Notes for remote control:
on for the first time, the demonstration
– First select the source you wish to
mode will start automatically.
control by pressing one of the
source select keys on the remote
Notes:
control (e.g. CD, TUNER, etc.).
– During the demonstration, if you press
– Then select the desired function
any source (or standby-on) button, the
( É , í , ë , etc.).
system will switch to the respective
mode (or standby).
– When the system is switched to standby
mode, the demonstration will resume 5
seconds later.
MINI HIFI SYSTEM
PROGRAM
STEREO
REPEAT
TIMER
REC
BACK
FRONT
NEWS
T.A.
AM
MW
FM
LW
HSD
60Hz
250Hz
500Hz
1KHz
2KHz
4KHz
8KHz
STANDBY
ON
CLOCK/
TIMER
CD1 • 2 • 3
BAND
TAPE 1 • 2
CDR / VIDEO
CD
TUNER
TAPE
AUX
PROG
SIDE A•B
PRESET
SEARCH • TUNING
STOP • CLEAR
PLAY PAUSE
PREV
SIDE
NEXT
SOUND NAVIGATION
DIGITAL SOUND
DYNAMIC BASS
CONTROL
BOOST
To stop the demonstration mode
• Press and hold Ç (on the system only)
for 5 seconds when the system is in
demonstration mode.
™ The demonstration will stop.
™ "DEMO OFF" is displayed.
™ The system will switch to standby
mode.
™ (for model FW-P78 only)
About five seconds later, the system
will go into an energy saving mode
( < 2 watts ). The low power
STANDBY ON LED will be lit.
Notes:
– When the system is switched on from
the main power outlet, the CD carousel
tray may open and close again to
initialize the set.
2/22/00, 7:29 PM
C
L
R
PRO LOGIC
S
S
RDS
NEWS/TA
NEWS!
A.REV
MIC
LEVEL
MIC
3139 116 19561
Advertisement
Table of Contents
