Recording - Philips FW-P78 Manual

All manuals and user guides at all-guides.com

RECORDING

MINI HIFI SYSTEM
PROGRAM
REPEAT TIMER REC
NEWS T.A. AM MW FM LW
60Hz 250Hz 500Hz 1KHz
STANDBY
ON
CLOCK/
TIMER CD1 • 2 • 3 BAND
CD TUNER
PROG
SEARCH • TUNING STOP• CLEAR
SOUND NAVIGATION
DIGITAL SOUND
CONTROL
24
pg 01-31/P75-P78/34-Eng 24
SWITCH OFF DOLBY PRO LOGIC
C
STEREO
L R
BACK
FRONT HSD
PRO LOGIC
2KHz 4KHz 8KHz
S S
Notes:
DOLBY B
NR
RDS
– It is not possible to change tape side
RDS
NEWS/TA NEWS!
TAPE 1 • 2 CDR / VIDEO
– If you do not intend to record via the
TAPE AUX
A.REV
SIDE A•B PRESET
PLAY PAUSE PREV SIDE NEXT
MIC
LEVEL
DYNAMIC BASS
MIC
BOOST
– For recording, use only tape of IEC type I
– The tape is secured at both ends with
– The recording level is set automatically,
– To prevent accidental recording, break
– If " CHECK TAPE " is displayed, the
Recording from other sources
WHEN RECORDING
(only on tape deck 2)
1 Press TAPE ( TAPE 1•2 ) to select tape
deck 2.
2 Load a blank tape into tape deck 2 with
during recording. the open side downward.
3 Press í or ë to select the recording
microphone, unplug the microphone to
tape side (see Tape Side under TAPE
avoid accidental mixing with other
section) .
recording source (for model FW-P78
4 Press CD, TUNER or AUX.
only).
• Start playback of the selected source.
5 Press REC to start recording.
(normal tape) or IEC type II (Cr0 2 ).
™ The
6 Press Ç to stop recording.
leader tape. At the beginning and end of
Notes:
tape, nothing will be recorded for six to
– Only å å å å å or ∂
seven seconds.
during recording .
– During recording, it is not possible to
regardless of the position of Volume,
listen to another source.
DBB or DSC.
Dubbing tapes
out the tab on the left shoulder of the
tape side you want to protect. tape deck 2)
1 Press TAPE ( TAPE 1•2 ) to select tape
protection tab has been broken. Put a
deck 2.
piece of clear adhesive tape over the
2 Load the prerecorded tape into tape
opening. Do not cover the Cr0 2 tape
deck 1 with full spool to the left and a
detection hole when covering the tab
blank tape into tape deck 2 with full
opening.
spool aside.
3 Press í or ë to select the recording
tape side (see Tape Side under TAPE
section) .
2/22/00, 7:30 PM
starts flashing.
REC
∂ mode is available ∂ ∂ ∂
(from tape deck 1 to
3139 116 19561