Tuner - Philips FW-P78 Manual

All manuals and user guides at all-guides.com

TUNER

MINI HIFI SYSTEM
PROGRAM SHUFFLE
REPEAT REC
TIMER
NEWS T.A. AM MW FM LW
60Hz 250Hz 500Hz 1KHz
STANDBY
ON
CLOCK/
TIMER CD1 • 2 • 3 BAND
CD TUNER
PROG
SEARCH • TUNING STOP • CLEAR
SOUND NAVIGATION
DIGITAL SOUND
CONTROL
Note:
– For 'EASY SET' feature, please refer to
page 13.
Tuning to radio stations
1 Press TUNER (BAND) to select TUNER
mode.
™ "TUNER" will be displayed.
A few seconds later, the current radio
frequency will be displayed.
2 Press TUNER (BAND) again to select
the desired waveband : FM or MW.
3 Press à or á for more than one
second, then release.
™ The display will show "SEARCH"
until a radio station with sufficient
signal strength is found.
18
pg 01-31/P75-P78/34-Eng 18
Storing Preset Stations
C
You can store up to 40 radio stations in the
STEREO
L R
BACK
FRONT
HSD
memory. When a preset radio station is
PRO LOGIC
2KHz 4KHz 8KHz
S S
DOLBY B
selected, the preset number appears next
NR
RDS
RDS
to the frequency on the display.
NEWS/TA
TAPE 1 • 2 CDR / VIDEO
Automatic programming
TAPE AUX
A.REV
SIDE A•B PRESET
1 Press TUNER (BAND).
PLAY PAUSE PREV SIDE NEXT
2 Press PROG for more than one second.
MIC
LEVEL
DYNAMIC BASS
MIC
BOOST
• Repeat this procedure until the desired
station is reached.
• To tune to a weak station, briefly press
à or á repeatedly until the display
shows the desired frequency and/or
when the best reception has been
obtained.
Notes:
– You can cancel the automatic
– If you want to reserve a section of
preset numbers, for example preset
numbers 1 to 9, select preset 10 before
starting automatic programming, only
the preset numbers 10 to 40 will be
programmed.
Manual programming
1 Press TUNER (BAND).
2 Press TUNER (BAND) again to select
™ The starts flashing and
PROGRAM
the desired waveband : FM or MW.
"AUTO" will be displayed.
3 Press PROG for less than one second.
™ The system will start searching for all
™ The
radio stations with RDS (if
™ The next available preset number will
applicable) and then followed by
be displayed for selection.
radio stations on FM and MW band
4 Press à or á to tune to the desired
respectively.
frequency.
™ All available stations will be stored
• If you wish to store the radio station to
automatically. The frequency and
another preset number, press 4 or 3 to
preset number will be displayed
select the desired preset number.
briefly.
5 Press PROG again.
™ The system will stop searching when
™ The
all the available radio stations are
radio station will be stored.
stored or when the memory for 40
• Repeat steps 3 – 5 to store other preset
preset radio stations is used.
radio stations.
™ The system will remain tuned to the
last stored preset radio station.
Notes:
– When 40 radio stations are stored and
you attempt to store another radio
station, the display will show " FULL ".
programming by pressing PROG or Ç
If you want to change an existing preset
(on the system only).
number, repeat steps 3 – 5.
2/22/00, 7:30 PM
starts flashing.
PROGRAM
disappears and the
PROGRAM
3139 116 19561