Illuminate For Connection Of Wired Controller And Indoor Units Network - Lennox VRF VE8C005C432P Installation Manual

Compact 8-way cassette indoor units
Table of Contents

Advertisement

receiver is provided with panel as standard accessory.
2) Both IDU and wired controller are equipped with signal receiver, and available for wireless
control respectively.

5.5 Illuminate for Connection of Wired Controller and Indoor Units Network

(1) Communication wire of indoor unit and outdoor unit (or indoor unit) is connected to D1, D2.
(2) Wired controller is connected to H1, H2.
(3) One indoor unit can connect two wired controllers that must be set as master one and slave
one.
(4) One wired controller can control 16 indoor units in maximum at the same time (as shown in
Fig.5.5.1).
(1)
The type of indoor units must be the same if they are controlled by the same wired controller.
(2)
When the indoor unit is controlled by two wired controllers, the addresses of the two wired controllers should
be different through address setting. Address 1 is for main controller; Address 2 is for slave controller. Detailed
settings please refer to the instruction manual of wired controller.
Multi Variable Air Conditioners Compact Cassette Type Indoor Unit
Fig.5.4.1
Fig.5.4.2
Fig.5.4.3
19

Advertisement

Table of Contents
loading

Table of Contents