Table of Contents
Advertisement
4.4 Locking Joint Installation
When the power cord and communication cable of the unit are connected, the power cable and
communication cable need to be fixed through the side panel locking connector. The fixing process is
as follows.
(1) Remove the locking joint bracket from the side panel.
(2) Attach the locking joint to the locking joint bracket.
(3) Power cable (communication line) passes through the locking joint and the side plate
engineering line over the wire crossing hole.
(4) Finally, reattach the locking joint bracket to the side panel.
Multi Variable Air Conditioners Compact Cassette Type Indoor Unit
Fig.4.4.1
Fig.4.4.2
13
Advertisement
Table of Contents
