Canon Optura 100 Instruction Manual page 94

Notes:
E
• When using an external microphone \ Connect it to the microphone
When using the DM-50 microphone \ Make sure nothing is connected to
When using the built-in microphone \ Make sure nothing is connected to
• To use your TV to monitor video, connect the S-video terminal (
AV terminal (use only the video plug) to your TV. You can monitor the sound
with headphones (
Preparations
Turn the camcorder's POWER switch to PLAY (VCR) and move the camcorder's
TAPE/CARD switch to TAPE. Load a recorded cassette.
• Make sure the REC/SAVE tab on the cassette has been slid to REC (closed
position).
Dubbing
Do not connect/disconnect any cables to/from the camcorder when dubbing audio
or preparing to dub audio.
PLAY
+
TAPE
(VCR)
( 37)
1. Open the menu and select VCR SET UP.
2. Select AUDIO DUB.
3. Select AUDIO IN or MIC. IN and close the menu.
94
31).
VCR SET UP
terminal.
the microphone terminal.
either the microphone terminal or the
accessory shoe.
AUDIO DUB.••AUDIO IN
32) or the
ZERO SET
SEARCH
MEMORY SELECT
AUDIO
REW PLAY FF
DUB.
AV
– / STOP + /
INSERT
× 2
PAUSE SLOW
REMOTE SET