Canon Optura 100 Instruction Manual page 129

How much power is left?
The indicator in the display shows you
approximately how much charge the
battery pack has left:
Notes:
• When the power is completely
exhausted, "CHANGE THE
BATTERY PACK" appears in the
display for 4 seconds and the empty
battery mark starts to flash. The
power indicator light also flashes.
• The indicator is not constant —
different levels will be shown when
you subject the battery pack and
camcorder to different conditions.
When to recharge
You can recharge a lithium ion battery pack whenever it is convenient. Unlike a
conventional battery pack, it does not have to be fully discharged first. However,
as the battery pack will naturally discharge itself over time, it is best to charge it
the same day you plan to use it, or the day before.
Taking care of the battery pack
Always attach the terminal cover.
• Do not allow any metal objects to
touch the terminals, as this can cause
a short circuit and damage the battery
pack. Attach the terminal cover
whenever the battery pack is not
being used.
Keep the terminals clean.
• The camcorder adapter or battery pack will not work properly if the terminal
are dirty. Attach the terminal cover whenever the battery pack is not being used.
Storing the battery pack
• If you do not use a battery pack for a period of more than a few months any
remaining charge may cause damage to the battery pack, and reduce usage time.
To prevent damage therefore, aim to use a battery pack's complete charge
before storage. See the optional battery pack's instructions for further details.
100%
↓
75%
↓
50%
↓
25%
↓
0%
CHANGE THE BATTERY PACK
B D
E
129