Canon Optura 100 Instruction Manual page 87

Canon optura 100 instruction manual
Hide thumbs Also See for Optura 100:
Table of Contents

Advertisement

Dubbing
1. Find a point on your recorded cassette slightly before the section
you want to copy and set it to playback pause mode.
2. Press the camcorder's REC PAUSE button.
• The camcorder enters record pause mode.
3. Start playback on the other digital device while you monitor the
picture.
4. Press the pause button.
• Recording starts.
5. When you get to the point where you want to stop recording, press
the stop button or the pause button.
• Recording stops.
6. Stop playback on the other device.
Notes:
• Blanks between recordings on the playback tape are recorded as anomalous
images on the tape that is being recorded to.
• When playing back a tape recorded in
camcorder, you cannot record correctly with other digital devices not equipped
with that mode.
Copyright signal
Certain pre-recorded software tapes are copyright protected. If you try to play
back such a cassette, "COPYRIGHT PROTECTED PLAYBACK IS
RESTRICTED" appears in the display for a few seconds and then the camcorder
displays a blank blue screen; you cannot view the contents of the cassette.
If you try to record from such a tape via the digital cable "COPYRIGHT
PROTECTED DUBBING RESTRICTED" appears in the display; you cannot
record the contents of the tape.
SP or
LP mode with the
E
87

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Optura 100 mc

Table of Contents