Canon Optura 100 Instruction Manual page 147

Slide show in
progress( 108).
Recording to a
memory card
( 103).
The number of still
images that can still
be recorded on the
memory card
( 103).
(Green: 6 or more
images.
Yellow: Between 1
and 5 images
Red: No more images)
Accessing a memory
card ( 107).
Current still
image/Total number
of still images on the
memory card
( 107).
Protect mark
( 109).
Card mix ( 117).
Print mark ( 109).
Data code ( 80).
Time Code
This records counter information,
including hour, minute, second, and
frame number on a special data code
area on the tape itself. It is reset
automatically when a new tape is
loaded. In TAPE CAMERA mode, the
frame number doesn't appear in the
display.
Recording reminder
When you start recording, the
camcorder counts from 0SEC to
10SEC. Shots which are shorter than
ten seconds may be difficult to edit
later. On the other hand, if you are not
planning to edit the recording,
remember that a shot which does not
contain action should generally last no
longer than 10 seconds.
E
147