Siemens Gigaset SL78 Manual page 12

Table of Contents

Advertisement

2) On the base station
Within 60 seconds, press and hold the Registration/Paging key on the base station
(approx. 3 sec.).
Please note
Information on how to deregister can be found in your base station's user
guide.
First battery charge and discharge
The correct charge status can only be displayed if the battery is first fully charged
and then discharged.
Please note
u
After the first battery charge and discharge, you can place your handset in
the charging cradle after every call.
u
Always repeat the charging and discharging procedure if you remove the
battery from the handset and reinsert it.
u
The battery may heat up during charging. This is not dangerous.
¤
For this, place the handset in the charging cra-
dle for six hours.
¤
6 h
First steps
Once the battery is fully
charged, remove the hand-
set from the cradle and do
not put it back again until
the battery is fully dis-
charged.
11

Advertisement

Table of Contents
loading

Table of Contents