JVC NX-F55 Instructions Manual page 14

Preparation (continued)
Connecting a TV with the
[COMPONENT] terminals
TV
To component
input terminals
Component video cable (not supplied)
■ IMPORTANT
• Connect the main unit directly to a TV (or a
monitor) without routing through a video
cassette recorder (VCR). Otherwise picture
distortion may occur during playback. (Routing
the connection through a VCR, however, does
not affect the audio quality.)
VCR
Main unit
Direct connection
• Connecting the main unit to a VCR-built-in-TV
may also cause picture distortion during
playback.
9
Do not connect the power cable until all other connections have been made.
Main unit
(rear view)
TV (or monitor)
Connecting a TV with the [HDMI
MONITOR OUT] terminal
This system can output uncompressed digital
video signals to a TV compatible with HDMI (High
Definition Multimedia Interface).
TV
To an HDMI input terminal
HDMI cable (not supplied)
NOTE
• The HDMI video signal type can be checked with
the "HDMI" indicator in the display window.
(Refer to "Selecting the video signal type" on
page 11.)
• If the picture is distorted while an HDMI TV is
connected, turn off the main unit and turn it on
again.
• A TV compatible with HDCP (High-Bandwidth
Digital Content Protection) can also be
connected to the [HDMI MONITOR OUT]
terminal, so that the uncompressed HD video
signal type can be output as well.
• This system is compatible with some basic
functions of HDMI CEC. (Refer to page 53.)
Main unit
(rear view)