JVC NX-F55 Instructions Manual page 38

Convenient functions of disc/file playback (continued)
2
Press the number buttons to
program tracks/chapters.
• You can refer to the program number in the
display window by pressing [DISPLAY].
Display for a DVD VIDEO
• Select a title number, and then a chapter
number.
Title number Chapter number
Program number Chapter number
Display for an MP3/WMA/WAV file
• Select a group number and then a track
number.
.
Group number Track number
Program number Track number
Display for a VCD/SVCD/CD
• Select a track number.
• As you finish the track selection, the total
time for the program playback is displayed.
.
Track number
Program number Track number
33
[DISPLAY] is pressed.
[DISPLAY] is pressed.
Total playback time
[DISPLAY] is pressed.
Example: TV screen for a DVD VIDEO
(Program screen)
NOTE
• Instead of using the number buttons, when you
press [ENTER] in the "Track/Chapter" column on
the TV screen, "ALL" appears and all the
chapters/tracks in the selected title/group are
programmed. (Only for a DVD VIDEO/MP3/
WMA/WAV file)
• You can erase the programmed tracks one by
one from the bottom of the list on the program
screen by pressing [CANCEL] repeatedly.
• You can erase the whole program by holding
down [CANCEL].
• Opening the disc tray also erases the program.
3
Press [DVD ] or
3
Confirming the program
■When a disc/file is played back
Press .
7
• Playback stops and the program screen appears
on the TV screen.
Canceling program playback
■When a disc/file is stopped
Press [PLAY MODE] repeatedly to
display an item other than
"PROGRAM" in the display window.
• This operation does not erase the program.
(playback).
3