About Your Hardware; Environmental Requirements - Watchguard AP322 Hardware Manual

Hardware Specifications

About Your Hardware

Hardware Specifications
Radio Type and
Frequency Band
Antenna
EIRP 
(Effective Isotropic
Radiated Power)
Ethernet interface
Power Interface
Power
Consumption
MTBF Rating
Dimensions
Weight

Environmental Requirements

To safely install your WatchGuard AP, we recommend that you:

Install the device indoors or outdoors, preferably under cover.

Make sure the device has adequate clearance for air flow and cooling.
Other environmental requirements:
Operating temperature
Operating relative humidity
Non-operating temperature
Non-operating relative humidity
2
AP322
2.4GHz, 802.11b/g/n. Max data rate: 450 Mbps
5GHz, 802.11a/n/ac. Max data rate: 1.3 Gbps
Six integrated omnidirectional antennas
28.77 dBm
1 x 10/100/1000 Mbps Gigabit Ethernet (LAN1)
802.3at PoE+
1 x 10/100/1000 Mbps Gigabit Ethernet (LAN2) for wired
extension. The LAN2 port cannot be used for link
aggregation.
LAN1 PoE+: 19W (802.3at)
Max: 19 W
Min: 11W
Average: 16W
157,108 hrs at 50°C
531,809 hrs at 25°C
210mm × 210mm × 67mm
3.22 lb. (1.46 kg)
-20°C to 55°C (-4°F to 131°F)
5% to 95% non-condensing
-40°C to 70°C (-40°F to 158°F)
5% to 95% non-condensing
WatchGuard AP322