Hardware Specifications
About Your Hardware
Hardware Specifications
Radio Type and
Frequency Band
Antenna
Ethernet interface
USB Port
Power Interface
Dimensions
Weight
Environmental Requirements
To safely install your WatchGuard AP device, we recommend that you:
Install the device indoors.
Make sure the device has adequate clearance for air flow and cooling.
Connect it to a surge-protected power supply to prevent damage from sudden power changes
Other environmental requirements:
Operating temperature
Operating relative humidity
Non-operating temperature
Non-operating relative humidity
2
AP320
2.4GHz, 802.11b/g/n. Max data rate: 450 Mbps
5GHz, 802.11a/n/ac. Max data rate: 1.3 Gbps
Six integrated omnidirectional antennas
1 x 10/100/1000 Mbps Gigabit Ethernet (LAN1)
802.3af PoE, PoE input voltage: 48V
1 x 10/100/1000 Mbps Gigabit Ethernet (LAN2)
1 x RJ45 serial console, RS 232 Serial
Bits per second: 115200
Data Bits: 8, Stop Bits: 1
Parity: None, Flow Control: None
1 USB port (Not in use)
PoE: DC48v (802.3af)
DC jack (12V DC input)
177mm × 155mm × 42mm
0.82 lb. (0.37 kg)
0°C to 40°C (32°F to 104°F)
5% to 95% non-condensing
-40°C to 70°C (-40°F to 158°F)
5% to 95% non-condensing
WatchGuard AP320