Environmental Requirements - Watchguard AP325 Hardware Manual

WatchGuard AP325 Hardware Guide
Ethernet Interface
Power Interface
Power
Consumption
MTBF Rating
Dimensions
Weight

Environmental Requirements

To safely install your WatchGuard AP, we recommend that you:
Install the device indoors.
n
Make sure the device has adequate clearance for air flow and cooling.
n
Connect it to a surge-protected power supply to prevent damage from sudden power changes
n
Other environmental requirements:
Operating Temperature
Operating Humidity
Non-operating Temperature
Non-operating Humidity
2
2 antennas: Third scanning radio
n
1 x 10/100/1000 Mbps Gigabit Ethernet (LAN1)
802.3at/af PoE for a wired LAN connection through a switch or hub.
1 x 10/100/1000 Mbps Gigabit Ethernet (LAN2) for a wired extension of an
SSID, VLAN extension, or link aggregation.
Power over Ethernet: 802.3at (PoE+) / 802.3af (PoE)
DC jack (6.3mm connector): 12V DC input, 1.5A
Max: PoE+ (802.3at): 16W
Max: PoE (802.3af): 12.95W
Max: DC power: 16W
Min: 6.5W
Average: 13.8W
1,081,559 hours at 25°C
535,205 hours at 45°C
L = 196 mm (7.72")
W = 196 mm (7.72")
H = 43 mm (1.69")
850g (1.87lb)
0° to 40°C (32° to 104°F)
0% to 95% non-condensing
–20° to 85°C (-4° to 185°F)
5% to 95%, non-condensing
WatchGuard Technologies, Inc.