Table of Contents
Advertisement
Figure 83. Removing the R1 paddle card
Figure 84. Removing the R4 paddle card
Next steps
1.
Install the R1 and R4 paddle
Installing R1 and R4 paddle cards
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3.
Remove the air
shroud.
4.
Remove the cooling fan cage
NOTE:
Observe the cable routing before disconnecting the cables.
Steps
1. Holding the touch point edges, align the hole on the paddle card with the guides on the system board.
cards.
Safety
instructions.
Before working inside your
assembly.
system.
Installing and removing system components
83
Advertisement
Table of Contents
