Table of Contents
Advertisement
Figure 30. Installing the left air shroud
Next steps
1.
Replace the air
shroud.
2. Follow the procedure listed in
Cooling fan module
Removing the cooling fan cage assembly
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. If installed,
remove the air
4. Disconnect the cables from system board that pass through the cooling fan cage assembly cable latch.
5. Open cable access latch to remove the cables and place them towards system front.
Steps
1. Lift the blue release levers to unlock the cooling fan cage assembly from the system.
2. Hold the release levers, and lift the cooling fan cage assembly away from the system.
36
Installing and removing system components
After working inside your
Safety
instructions.
Before working inside your
shroud.
system.
system.
Advertisement
Table of Contents
