Figure 95. Removing the R1 paddle card
Figure 96. Removing the R4 paddle card
Next steps
1.
Install the R1 and R4 paddle
Installing R1 and R4 paddle cards
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3.
Remove the air
shroud.
4.
Remove cooling fan cage
NOTE:
Observe the cable routing before disconnecting the cables.
5. Install the paddle card cable into side wall bracket.
Steps
1. Holding the touch point edges, align the hole on the paddle card with the guides on the system board.
cards.
Safety
instructions.
Before working inside your
assembly.
system.
Installing and removing system components
101