5. Detach the earth wire screw, terminal wire (Brown), terminal wire (Black),
terminal wire (Red) and earth wire screw (Green).
18.1.1.3
To remove discharge grille
9. Pull out the
electronic
controller halfway.
8. Remove screw to
remove terminal
board complete.
7. Detach the
connectors
CN2 (Black),
GND (Green),
and CN1 (White)
then remove the
high voltage
generator.
6. Remove the
indicator complete
then detach the
connectors
CN-DISP and CN-RCV.
Figure 3
10. Detach 7 connectors as labeled from the electronic controller.
Then pull out electronic controller gently.
Figure 5
114
CN-RMT
Figure 4
AC303
RY-PWR
CN-FM
CN-TH
CN-STM2
CN-STM1
CN-RCV
CN-DISP
CN-STM4
CN-CNT