Installation instructions
Cancelling the calibration
If you want to cancel the calibra-
tion:
Press the ESC button A.
➜
The calibration continues in the
background.
Cleaning the device
Clean the contacts of the con-
➜
trol panel regularly using a soft
cloth moistened with cleaning
alcohol.
Uninstalling the device
Disconnect the negative pole of
➜
the battery. Observe the safety
notes of the vehicle manufac-
turer.
➜
Remove the control panel.
2
Insert the brackets 2 on the left
➜
and the right side in the openings
in the control panel and push
them in until the lateral springs
disengage with an audible click
sound.
➜
Pull out the device evenly using
both brackets.
Remove the brackets and reat-
➜
tach the control panel.
Press on the lateral tabs of the
➜
individual connectors and dis-
connect all connectors.
Warranty
We provide a manufacturer's war-
ranty for our products purchased
within the European Union. For
devices purchased outside the
European Union, the warranty terms
issued by our respective responsi-
ble domestic agency are valid.
The warranty terms can be called
up under www.blaupunkt.com or
requested directly from:
Blaupunkt GmbH
Hotline
Robert-Bosch-Str. 200
D-31139 Hildesheim
Warranty
81