124
2. Instrument cluster
Display customization
Display of the following screens can be switched on or off.
Audio display
●
Route guidance display (vehicles with navigation system)
●
Changing the settings
■
Continue holding the "DISP" but-
1
ton until the screen changes, and
repeat the process until the set-
ting you want to change is dis-
played.
Customization can be performed
when the head-up display is on and
the vehicle is traveling at less than
8 km/h (5 mph).
Press the "DISP" button to switch between on and off.
2
On and off will be switched between each time the button is pressed.
If the button is left alone without being operated for a short time, setting will be fin-
ished automatically.
Head-up display
■
The head-up display may seem dark and hard to see when viewed through sunglasses,
●
especially polarized sunglasses.
Adjust the brightness of the head-up display or remove your sunglasses.
When the head-up display is turned off, it will remain off even if the power switch is
●
turned to ON mode after the power switch has been turned off.
The startup image will be displayed on the head-up display after the power switch has
●
been turned to ON mode while the head-up display switch is set to on.
When the 12-volt battery is disconnected
■
The customize settings of the head-up display will be reset.
Head-up display automatic position adjustment
■
If the display position is recorded into memory, the head-up display will be automatically
adjusted to the desired position. (P. 178)
GS450h_300h_OM_OM30F92E_(EE)