Table of Contents
Advertisement
Overview
1.5
Typical Hardware Connections
To set up the BUF18830EVM hardware, connect the two PCBs of the EVM together (that is, the
BUF18830 Test Board and USB_DIG_Platform board) via a 25-pin DSUB connector, and apply a power
source. The external connections may be the real-world system that the BUF18830 will be incorporated
into.
Figure 5
illustrates the typical hardware connections.
8
BUF18830EVM User Guide and Software Tutorial
Figure 5. Typical Hardware Connections for BUF18830EVM
Copyright © 2011–2016, Texas Instruments Incorporated
SBOU103A – April 2011 – Revised May 2016
Submit Documentation Feedback
www.ti.com
Advertisement
Table of Contents
