Table of Contents
Advertisement
www.ti.com
2.3.10
Control Panel Button
Pressing the Control Panel button brings up a display panel that allows you to adjust each channel using
a set of graphical sliders, as shown in
output. The DAC code and corresponding output value of each channel change automatically. This
function is similar to the slider present on the primary BUF18830EVM software window that changes
based on the channel that highlighted (as discussed in the
SBOU103A – April 2011 – Revised May 2016
Submit Documentation Feedback
Figure
24. Simply drag the slider to adjust the desired channel
Figure 24. Control Panel Button and Window
Copyright © 2011–2016, Texas Instruments Incorporated
above
section).
BUF18830EVM User Guide and Software Tutorial
BUF18830EVM Software
23
Advertisement
Table of Contents
