Table of Contents
Advertisement
www.ti.com
BUF18830EVM Default Jumper Settings
Figure 9
shows the default jumper configuration for the BUF18830EVM. In general, the jumper settings of
the USB_DIG_Platform will not need to be changed. You may want to change some of the jumpers on the
BUF18830EVM board to match your specific configuration. For example, you may wish to set a specific
2
I
C address.
SBOU103A – April 2011 – Revised May 2016
Submit Documentation Feedback
Default
Jumpers
Figure 9. BUF18830EVM Default Jumper Settings
Copyright © 2011–2016, Texas Instruments Incorporated
BUF18830EVM User Guide and Software Tutorial
Overview
11
Advertisement
Table of Contents
