Table of Contents
Advertisement
www.ti.com
After the installation process initializes, the user is given the choice of selecting the directory in which to
install the program; the default location is C:\Program Files\BUF18830\ and C:\Program Files\National
Instruments\. Following this option, two license agreements are presented that must be accepted, as
shown in
Figure
11. After accepting the Texas Instruments and National Instruments license agreements,
the progress bar opens and shows the installation of the software, as
installation process is completed, click Finish.
2.3
Software Description and Set-Up
The BUF18830EVM software allows the user to read and write to all registers in the BUF18830 gamma
correction buffer. Furthermore, it allows programming of the OTP register on the BUF18830. The software
also permits the user to select either I
that you have the latest version of the software.
SBOU103A – April 2011 – Revised May 2016
Submit Documentation Feedback
Figure 11. BUF18830EVM License Agreements
Figure 12. BUF18830EVM Software Installation Progress
2
C address. Press the About button, as shown in
Figure 13. BUF18830EVM Software About Button
Copyright © 2011–2016, Texas Instruments Incorporated
BUF18830EVM Software
Figure 12
illustrates. Once the
BUF18830EVM User Guide and Software Tutorial
Figure
13, to verify
15
Advertisement
Table of Contents
