Buf18830Evm Hardware Setup - Texas Instruments BUF18830EVM User Manual

Overview
1.2 Related Documentation from Texas Instruments
The following documents provide information regarding Texas Instruments' integrated circuits used in the
assembly of the BUF18830EVM. This user's guide is available from the TI web site under literature
number SBOU103. Any letter appended to the literature number corresponds to the document revision
that is current at the time of the writing of this document. Newer revisions may be available from the
web site, or call the Texas Instruments' Literature Response Center at (800) 477-8924 or the Product
Information Center at (972) 644-5580. When ordering, identify the document by both title and literature
number.

BUF18830EVM Hardware Setup

Figure 2 shows the system setup for the BUF18830EVM. The PC runs software that communicates with
the USB_DIG_Platform. The USB_DIG_Platform generates the analog and digital signals used to
communicate with the BUF18830. Connectors on the BUF18830 test board allow the user to connect to
the system under test conditions and monitor the power, current, and voltage.
4
BUF18830EVM User Guide and Software Tutorial
Related Documentation
Document
BUF18830 Product Data Sheet
USB_DIG_Platform User Guide
+6V dc wall
supply
USB Dig Platform
Figure 2. BUF18830EVM Hardware Setup
Copyright © 2011–2016, Texas Instruments Incorporated
Literature Number
SBOS524
SBOU058
BUF18830
Analog Supply
Outputs
BUF18830
Test Board
SBOU103A – April 2011 – Revised May 2016
Submit Documentation Feedback
www.ti.com
TI
Measurement
Device