IBM x3100 User Manual page 42

6. Follow the instructions that come with the adapter to set jumpers or switches, if
7. Carefully grasp the adapter by the top edge or upper corners, and align it with
8. Reinstall the screw that you removed from the expansion slot earlier to secure
9. Connect required cables to the adapter. Route cables so that they do not block
If you have other devices to install or remove, do so now. Otherwise, go to
"Completing the installation" on page 31.
30
System x3100 Type 4348: User's Guide
any.
the expansion-slot guides; then, press the adapter firmly into the expansion slot.
Move the adapter directly from the static-protective package to the expansion
slot.
Attention: Make sure that the adapter is correctly seated in the expansion slot
before you turn on the server. Incomplete installation of an adapter might
damage the system board or the adapter.
Front adapter
retention
bracket
the adapter to the chassis.
the flow of air from the fan. If you are installing an optional SCSI adapter, see
"Cabling an optional SCSI adapter" on page 31 for additional information.
Rear adapter
retention
bracket
Expansion slot
cover