IBM x3100 User Manual page 18

v Automatic error retry or recovery
v Automatic memory downsizing on error detection
v Automatic restart on nonmaskable interrupt (NMI)
v Automatic Server Restart (ASR) logic supporting a system restart when the
v Automatic server restart after a power failure, based on the BIOS setting
v Availability of microcode level
v Boot-block recovery
v Built-in monitoring for fan, power, temperature, and voltage
v CD-based diagnostic programs
v Cooling fans with speed-sensing capability
v Customer support center that is available 24 hours a day, 7 days a week
v Error codes and messages
v Error correcting code (ECC) double-data-rate 2 (DDR2) synchronous dynamic
v Error logging of POST failures
v Integrated Ethernet controller
v Memory change messages posted to the error log
v Power-on self-test (POST)
v Read-only memory (ROM) checksums
v Redundant Ethernet capabilities (requires an optional Ethernet adapter) with
v Standby voltage for system-management features and monitoring
v System auto-configuring from the configuration menu
v System-error LED on the front bezel and diagnostics LEDs on the system board
v Upgradeable microcode for POST, BIOS, and read-only memory (ROM) resident
v Wake on LAN
1. Service availability will vary by country. Response time varies; may exclude holidays.
6
System x3100 Type 4348: User's Guide
operating system becomes unresponsive
random access memory (SDRAM) with serial presence detect (SPD)
failover support
code, locally or over a LAN
®
capability
1