Table of Contents
Advertisement
3.Insert the tongue plate into the
hole and then attach the mini
tongue on the holder.
Pre-tensioner seat belt
(if equipped)
ORP032077
Your vehicle is equipped with driver's
and front passenger's pre-tensioner
seat belts (retractor pretensioner and
EFD (Emergency Fastening Device)).
The pre-tensioner seat belts can be
activated, where the frontal collision
is severe enough, together with the
air bags.
When the vehicle stops suddenly, or
if the occupant tries to lean forward
too quickly, the seat belt retractor will
lock into position. In certain frontal
collisions, the pre-tensioner will acti-
vate and pull the seat belt into tighter
contact against the occupant's body.
Safety features of your vehicle
(1) Retractor Pretensioner
The purpose of the retractor pre-
tensioner is to make sure that the
shoulder belts fit in tightly against
the occupant's upper body in cer-
tain frontal collisions.
(2) EFD (Emergency Fastening Device)
The purpose of the EFD is to
make sure that the pelvis belts fit
in tightly against the occupant's
lower body in certain frontal colli-
sions. (if equipped)
If the system senses excessive ten-
ORP032066
sion on the driver or passenger's
seat belt when the pre-tensioner sys-
tem activates, the load limiter inside
the
retractor
release some of the pressure on the
affected seat belt. (if equipped)
pre-tensioner
will
3 29
Advertisement
Table of Contents
