Table of Contents
Advertisement
✽ ✽ NOTICE
• During normal cruise control
operation, when the SET switch is
activated or reactivated after
applying the brakes, the cruise
control will energize after approx-
imately 3 seconds. This delay is
normal.
• To activate cruise control, depress
the brake pedal at least once after
turning the ignition switch to the
ON position or starting the engine.
This is to check if the brake switch
which is important part to cancel
cruise control is in normal condi-
tion.
Cruise control switch
CANCEL : Cancels cruise control
operation.
: Turns cruise control system on
or off.
RES+ : Resumes
or
increases
cruise control speed.
SET- : Sets or decreases cruise con-
trol speed.
Driving your vehicle
To set cruise control speed:
ORP052034
1.Press the cruise
steering wheel, to turn the system
on. The cruise indicator light will
illuminate.
2.Accelerate to the desired speed,
which must be more than approxi-
mately 30 km/h (20 mph).
✽ ✽ NOTICE
- Manual transaxle
For manual transaxle vehicles, you
should depress the brake pedal at
least once to set the cruise control
after starting the engine.
ORP052035
button on the
5 55
Advertisement
Table of Contents
