Table of Contents
Advertisement
To drive over the preset speed limit
you must depress hard on the accel-
erator pedal (more than approxi-
mately 80%) until the kick down
mechanism works with a clicking
noise. Then the set speed limit will
blink and chime will sound until you
return the vehicle speed within the
speed limit.
✽ ✽ NOTICE
• Depressing the accelerator pedal
less than approximately 50%, the
vehicle will not speed over the pre-
set speed limit but maintain the
vehicle speed within the speed
limit.
• A clicking noise heard from the
kick down mechanism by depress-
ing the accelerator pedal fully is a
normal condition.
To turn off the speed limit con-
trol, do one of the following:
• Press the speed limit
once again.
• Press the cruise switch (If you
press cruise switch, the cruise sys-
tem will turn on).
• Turn the ignition off.
If you press the CANCEL switch
once, the set speed limit will cancel,
but it will not turn the system off. If
you wish to reset the speed limit,
move the lever up (to RES+) or down
(to SET-) to the desired speed.
Driving your vehicle
■ Type A
CAUTION
ORP052041
The "---" indicator will blink if
switch
there is a problem with speed
limit control system.
If this occurs, we recommend
that the system be checked by
an authorised Kia dealer.
■ Type B
ORP052056/ORP052057
5 61
Advertisement
Table of Contents
