Table of Contents
Advertisement
What to do in an emergency
7.Plug the compressor power cord
into the front passenger side power
outlet of the vehicle.
WARNING
Only use the front passenger
side power outlet when con-
necting the power cord.
6
26
8.With the engine start/stop button
position on or ignition switch posi-
tion on, switch on the compressor
and let it run for approximately 5~7
minutes to fill the sealant up to
proper pressure. (refer to the Tyre
and Wheels, chapter 8). The infla-
tion pressure of the tyre after filling
is
unimportant
checked/corrected later.
Be careful not to overinflate the
tyre and stay away from the tyre
ORP042182R
when filling it.
When the tyre and wheel are dam-
aged, do not use Tyre Mobility Kit for
your safety.
CAUTION
Do not attempt to drive your
vehicle if the tyre pressure is
below 29 PSI (200kpa). This
could result in an accident due
to sudden tyre failure.
9.Switch off the compressor.
10. Detach the hoses from the
sealant bottle connector and
from the tyre valve.
Return the TMK to its storage loca-
tion in the vehicle.
and
will
be
Carbon monoxide poisoning
and suffocation is possible if
the engine is left running in a
poorly ventilated or unventilat-
ed location (such as inside a
building).
- Tyre pressure
WARNING
- Carbon
monoxide
Advertisement
Table of Contents
