Table of Contents
Advertisement
MANUAL TRANSAXLE (IF EQUIPPED)
Manual transaxle operation
The shift lever can be moved without
pushing the button (1).
The button (1) must be pushed whilst
moving the shift lever.
• The manual transaxle has 6 for-
ward gears.
This shift pattern is imprinted on
the shift knob. The transaxle is fully
synchronized in all forward gears
so shifting to either a higher or a
lower gear is easily accomplished.
• Depress the clutch pedal down
fully whilst shifting, then release it
slowly.
If your vehicle is equipped with an
ignition lock switch, the engine will
not start when starting the engine
without depressing the clutch
pedal.
• The shift lever must return to the
neutral position before shifting into
R (Reverse). The button located
immediately below the shift knob
must be pushed upward whilst
moving the shift lever to the R
(Reverse) position.
• Make sure the vehicle is complete-
ly stopped before shifting into R
(Reverse).
OJD052004
Never operate the engine with the
tachometer (rpm) in the red zone.
Driving your vehicle
CAUTION
• When downshifting from 5
(Fifth) gear to 4 (Fourth) gear,
caution should be taken not to
inadvertently move the shift
lever sideways in such a man-
ner that second gear is
engaged.
Such
a
downshift may cause the
engine speed to increase to
the point that the tachometer
will enter the red-zone. Such
over-revving of the engine
may possibly cause engine
and transaxle damage.
• Do not downshift more than 2
gears or downshift the gear
when the engine is running at
high speed (5,000 RPM or
higher). Such a downshifting
may damage the engine and
transaxle.
• When shifting between 5th
and 6th gear, you should
always push the gear level all
the way to the right. You could
otherwise shift unintentionally
into 3rd or 4th gear and dam-
age the transaxle.
drastic
5 23
Advertisement
Table of Contents
