Table of Contents
Advertisement
7. Install a new headlight bulb and
snap the headlight bulb retaining
wire into position by aligning the
wire with the groove on the bulb.
8. Connect the headlight bulb socket
connector.
9. Install the headlight bulb cover by
turning it clockwise.
10. Connect the power connector to
the back of the headlight assem-
bly.
Headlight (Low, High Non-HID
Type)
Follow the steps 1 to 2 from the pre-
vious chapter.
3. Remove the headlight bulb cover
by turning it counterclockwise.
4. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
5. Pull the bulb out of the socket.
6. Insert a new bulb into the socket.
7. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
8. Install the headlight bulb cover by
turning it clockwise.
9. Connect the power connector to
the back of the headlight assem-
bly.
✽ ✽ NOTICE
If the headlight aiming adjustment
ORP072059
is necessary after the headlight
assembly is reinstalled, consult an
authorised Kia dealer.
Maintenance
7 105
Advertisement
Table of Contents
