Table of Contents
Advertisement
Instrument lighting
You can adjust the brightness of the instrument lighting.
– Switch on the light.
– Turn the control dial
instrument lighting.
Using the system
Safety
Fig. 37 Dash panel:
Instrument lighting
⇒ fig. 37
to the desired intensity of the
Driving Tips
Headlight range adjustment
Once the low beam is switched on you can then adapt the
range of the headlights to the load of the vehicle.
⇒ fig. 38
– Turn the control dial
low beam so that oncoming traffic is not dazzled.
Settings
The positions correspond approximately to the following vehicle loads:
A
Front seats occupied, luggage compartment empty.
-
A
All seats occupied, luggage compartment empty.
1
A
All seats occupied, luggage compartment laden.
2
A
Driver seat occupied, luggage compartment laden.
3
Caution
Set the headlight beam adjustment in such a way as to avoid dazzling
oncoming traffic.
General Maintenance
Breakdown assistance
Lights and Visibility
Fig. 38 Dash panel:
Lights and Visibility
until you have adjusted the
Technical Data
59
Advertisement
Table of Contents
