Skoda Superb 2005 Owner's Manual page 252

Wheel bolts with caps*
The caps are designed to protect the wheel bolts.
Removing
– Insert the plastic clip (in the car tool kit) sufficiently far onto
the cap until the inner catches of the clip are positioned at the
collar of the cap.
– Pull the cap off with the plastic clip
Installing
– Insert the caps onto the bolts.
Using the system Safety
Fig. 189 Changing a
wheel: Removing the
cap
⇒ fig.
189.
Driving Tips General Maintenance
Slackening and tightening wheel bolts
Slacken the wheel bolts before jacking up the vehicle.
Slackening wheel bolts
– Insert the wheel wrench fully onto the wheel bolt
– Grasp the end of the wrench and turn the bolt about one turn
⇒ fig.
to the left 190.
Tightening wheel bolts
– Insert the wheel wrench fully onto the wheel bolt
– Grasp the end of the wrench and turn the bolt to the right until
it is tight.
4)
Use the appropriate adapter for slackening and tightening the safety wheel bolts
⇒ page 254.
Breakdown assistance
Breakdown assistance 251
Fig. 190 Changing a
wheel: Slackening
wheel bolts
4)
.
4)
.
Technical Data