Enabling The Hourly Time Signal; Turning Off An Alarm Or The Hourly Time Signal - Casio 5553 Operation Manual

Testing the alarm
●
In the Alarm Mode, hold down (D) to sound the
alarm.
To stop the alarm
●
Pressing any button while the beeper is
sounding stops it.
The snooze alarm operation sounds the
●
alarm up to seven times at five-minute
intervals. [SNZ] flashes on the display to
indicate that a snooze alarm operation is in
progress.
Any one of the operations below will stop an
●
ongoing snooze alarm operation.
Turning off the snooze alarm
ー
Displaying the snooze alarm setting
ー
screen
Displaying the Timekeeping Mode
ー
setting screen
Changing the DST setting of your Home
ー
Time in the World Time Mode
Changing your Home City in the World
ー
Time Mode
Note
A beeper sounds for 10 seconds when
●
an alarm time is reached.
The watch will automatically return
●
from the Alarm Mode to the
Timekeeping Mode if you do not
perform any operation for about two or
three minutes.
Watch Operation Guide 5553
Enabling the Hourly Time
Signal
1.
Enter the Alarm Mode.
Navigating Between Modes
l
2.
Press (D) to display the hourly time signal
screen ([SIG]).
3.
Press (A) to toggle the hourly time signal
between enabled (on) and disabled (off).
[SIG] is displayed while the hourly time
●
signal is enabled.
Turning Off an Alarm or the
Hourly Time Signal
To stop an alarm or the hourly time signal from
sounding, perform the steps below to turn it
off.
To have an alarm or hourly time signal
●
sound again, turn it back on.
Note
Indicators are displayed while any of
●
the alarms or the hourly time signal is
turned on.
The applicable indicators are not
●
displayed while all of the alarms are
turned off and/or the hourly time signal
is turned off.
Hourly time signal
Alarm
Snooze
1.
Enter the Alarm Mode.
Navigating Between Modes
l
2.
Use (D) to scroll through the alarm ([AL1]
to [AL4], [SNZ]) and hourly time signal
([SIG]) screens until the one you want to
turn off is displayed.
Alarm or hourly time signal
3.
Press (A) to turn off the displayed alarm or
the hourly time signal.
Each press of (A) toggles between ON
●
and OFF.
Turning off all of the alarms and the
●
hourly time signal causes [ALM] and
[SIG] to disappear from the display.
Note
If [ALM] remains on the display, it
●
means that at least one alarm is still
turned on. To turn off all of the alarms,
repeat steps 2 and 3 until the [ALM]
indicator is no longer displayed.
12