Enabling The Hourly Time Signal; Turning Off An Alarm Or The Hourly Time Signal; Moving To Another Time Zone; Stopwatch - Casio BABY-G Operation Manual

Enabling the Hourly Time
Signal
1.
Enter the Alarm Mode.
Navigating Between Modes
l
2.
Use (D) to display the hourly time signal
screen ([SIG]).
3.
Press (A) to toggle the hourly time signal
between enabled and disabled.
4.
Hold down (C) for at least one second to
return to the Timekeeping Mode.
Turning Off an Alarm or the
Hourly Time Signal
To stop an alarm or the hourly time signal from
sounding, perform the steps below to turn it
off.
To have an alarm or hourly time signal
●
sound again, turn it back on.
1.
Enter the Alarm Mode.
Navigating Between Modes
l
2.
Use (D) to scroll through the alarm ([AL1]
to [AL5]) and hourly time signal ([SIG])
screens until the one you want to turn off
is displayed.
Alarm or hourly time signal
3.
Press (A) to turn off the displayed alarm or
the hourly time signal.
Each press of (A) toggles between ON
●
and OFF.
4.
Hold down (C) for at least one second to
return to the Timekeeping Mode.
Watch Operation Guide 5659
Moving to Another
Use the procedure below to easily change day
and time settings of the watch to a destination
location.
Before Boarding
●
1.
Configure the World Time to the current
time at your destination.
Using CASIO WATCHES to Configure
l
Settings
Using Watch Operations to Configure
l
Settings
2.
Disable auto time adjustment.
Using the Watch in a Medical Facility or
l
Aircraft
After Arriving
●
1.
Swap the origin time zone time with the
destination time zone time.
Before swapping
Destination time
Using CASIO WATCHES to Configure
l
Settings
Using Watch Operations to Configure
l
Settings
2.
Enable auto time adjustment.
Using the Watch in a Medical Facility or
l
Aircraft
3.
Adjust the time setting.
Triggering Immediate Time Adjustment
l
Time Zone
Current time
Destination time
After swapping
Destination time

Stopwatch

The Stopwatch Mode lets you measure up to
60 minutes in one-second units.
In addition to normal elapsed time
measurements, the stopwatch also lets you
take split time and lap time readings.

Split Times and Lap Times

Split time
●
A split time is the time elapsed from the start,
up to any point along the course of an event.
D
Start
Split 1
A
Split 2
A
Split 3
D
Goal
Lap time
●
A lap time shows the time elapsed during a
specific lap around a track, etc.
D
Start
Lap 1
A
Lap 2
A
Lap 3
D
Goal
19