Swapping Your Home Time And World Time; Alarm; Configuring Alarm Settings - Casio 5553 Operation Manual

Swapping Your Home Time
and World Time
1.
Enter the World Time Mode.
Navigating Between Modes
l
2.
Press (A) and (B) at the same time.
This will swap your Home City Time and
World Time.
Example: To swap your Home City
(TYO:TOKYO) and World Time City
(NYC:NEW YORK)
Before swapping After swapping
TYO time NYC time
NYC time
Watch Operation Guide 5553
The watch will beep when the alarm time is
reached. You can configure up to four
standard daily alarms, and one daily alarm
with snooze. The hourly time signal causes the
watch to beep every hour on the hour.
Snooze causes the alarm to sound up to
●
seven times, at five-minute intervals.

Configuring Alarm Settings

TYO time
1.
Enter the Alarm Mode.
Navigating Between Modes
l
2.
Press (D) to scroll through alarms ([AL1]
to [AL4], [SNZ]) until the one you want to
configure is displayed.
3.
Hold down (A) for at least two seconds.
Release the button when the hour setting
starts to flash.
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.

Alarm

Alarm number
Alarm time
Alarm hour
4.
Use (B) and (D) to change the hour setting.
Holding down (B) or (D) scrolls through
●
settings at high speed.
If you are using 12-hour timekeeping,
●
[P] indicates p.m.
5.
Press (C).
This causes the minutes digits to flash.
Alarm minute
6.
Use (B) and (D) to set the minute setting.
7.
Press (A) to complete the setting
operation.
[ALM] is shown on the display while an
●
alarm is set.
11