Change Adc Format To Analog Input; Choose Vca Gain - Texas Instruments AFE5818 User Manual

Testing the AFE5818 EVM Data Capture with LVDS and JESD Interface
2. Select firmware: AFE5818 _14X_B(LVDS) or AFE5818 B_4L_16x(JESD).
3. Change the plot type from Codes to Real FFT.
4. Enter 50M in the field labeled ADC Output Data Rate.
5. Enter 5M in the field labeled ADC Input Target Frequency, or set to the desired input that is being
provided to SMA J10, IN_1, as described in

6. Choose VCA GAIN.

7. Press the Capture button.
12
AFE5818 16-Channel Analog Front End Evaluation Module (EVM Rev. C)
Figure 14. Change ADC Format to Analog Input
Section
Figure 15. Choose VCA Gain
Copyright © 2015, Texas Instruments Incorporated
4.1.
Submit Documentation Feedback
www.ti.com
SLOU430 – October 2015