To 1-Sided - Canon iR 2020 Copying Manual

2 to 1-Sided

This mode automatically turns over two-sided originals placed in the feeder to make
one-sided copies on different sheets of paper.
2
IMPORTANT
Make sure to place originals with a horizontal (landscape) orientation, such as LTRR and
STMTR, horizontally. If these originals are placed vertically, the back side of the original
is copied upside down.
NOTE
If the Feeder (DADF-P1) is attached, it is recommended that you set the originals in the
feeder when copying in 2 to1-Sided mode. This enables you to automatically scan the
front and back sides of the originals without the need to turn over and re-feed the
originals.
1
Two-Sided
2
OK
2-26 Two-Sided Copying
Original
Place your originals ➞ press [Two-Sided].
If necessary, see the screen shot in step 2 of "1 to 2-Sided," on p. 2-20.
Press [ ] or [
press [OK].
Copies
] until '2 > 1-SIDED' appears ➞