2 to 2-Sided
This mode enables you to make two-sided copies from two-sided originals.
NOTE
If the Feeder (DADF-P1) is attached, it is recommended that you set the originals in the
feeder when copying in 2 to 2-Sided mode. This enables you to automatically scan the
front and back sides of the originals without the need to turn over and re-feed the
originals.
1
Two-Sided
Place your originals ➞ press [Two-Sided].
If necessary, see the screen shot in step 2 of "1 to 2-Sided," on p. 2-20.
2
Press [
press [OK].
OK
Original
] until '2 > 2-SIDED' appears ➞
] or [
Copy
Two-Sided Copying
2
2-23