Pause Time; Auto Redial; Check Dial Tone Before Sending; Setting Procedure For Receiving - Canon Color imageCLASS MF8050Cn Basic Operation Manual

How to display the settings
] → <Send/Receive Settings> → <Fax Settings> → <Send
[
Settings> → <ECM Sending>
Settings
(Boldface: Default settings)
Off Does not use the ECM function.
On
Uses the ECM function.

Pause Time

Specify the number of seconds for a pause when [
is pressed.
For deatails on adding pauses, see "Sending a Fax Abroad
(Adding Pauses)" (→P.6-8)
How to display the settings
] → <Send/Receive Settings> → <Fax Settings> → <Send
[
Settings> → <Pause Time>
Settings
(Boldface: Default settings)
1 to 2 to 15 (seconds)

Auto Redial

Automatic redialing enables the machine to automatically
redial the recipient's fax number if the recipient cannot be
reached due to a busy line, or if a sending error occurs.
You can set the number of times and the intervals for redialing.
How to display the settings
] → <Send/Receive Settings> → <Fax Settings> → <Send
[
Settings> → <Auto Redial>
Settings
(Boldface: Default settings)
Does not redial automatically.
Off When redialing manually, see "Redialing
(Manual Redialing)" (→P.6-6) .
Redial Times: Specifi es the number of times for
1 to 2 to15 (times)
redialing.
Redial Interval:
On
Specifi es the interval for redialing.
2 to 99 (minutes)
Redial If Error Occurs: Specifi es whether or not to redial when a
Off , On
sending error occurs.

Check Dial Tone Before Sending

When sending a fax, you can specify whether or not to dial
after checking the dial tone.
How to display the settings
] → <Send/Receive Settings> → <Fax Settings> → <Send
[
Settings> → <Check Dial Tone Before Sending>
Settings
(Boldface: Default settings)
Off
Does not check the dial tone.
On Dials after checking the dial tone.

Setting Procedure for Receiving

Specify the settings for receiving using the following procedure.
This section describes the procedure for changing the setting
for "ECM Receiving" as an example.
Keys to be used for this operation
] (Pause)
1
Press [
2
Select <Send/Receive Settings> with [
and then press [OK].
Menu
Common Settings
Copy Settings
Memory Media Settin
Send/Receive Setting
3
Select <Fax Settings> with [
press [OK].
Send/Receive Settings
Common Settings
Fax Settings
4
Select <Receive Settings> with [
then press [OK].
Fax Settings
Basic Settings
Send Settings
Receive Settings
Fax Setup Guide
5
Select <ECM Receiving> with [
then press [OK].
Receive Settings
ECM Receiving
Incoming Ring
Remote Receiving
Manual/Auto Switch
Menu
OK
] (Menu).
...
] or [ ], and then
] or [ ], and
] or [ ], and
] or [ ],
6-23