Error Codes - Canon IMAGECLASS MF4150 Basic Manual

Error Codes

An error code is a four-digit code displayed on the LCD or in the bottom row of a
TX Report or an RX Report when an error occurs.
Ex.
JOB NO. TYPE NO.
0001 TX 001
For details on TX Report and RX Report, see Chapter 4, "Reports and Lists," in the
Advanced Guide.
See the table below for individual error codes.
Error Code
0001 The sender may not be using a G3
fax machine.
0070 Reception was manually canceled
on the machine.
0071 The machine's memory is full.
0080 The recipient's machine did not
respond within 35 seconds.
008D The recipient's machine has run out
of paper.
00A0 Transmission was manually
canceled on the machine.
00A1 There is a document jam.
00FF All redialing attempts have failed.
DESTINATION TEL/ID DATE
WEST-1 04/10
55555555
00A0:TX CANCEL
Error Code
Description
TIME PAGE TIME USE
16:00 002 02'21
Make sure the sender's machine is
compatible with your machine.
Ask the sender to resend the
document if necessary.
Print, send, or delete any
documents stored in memory.
Resend the document. Ask the other
party to check their machine. If you
are making an overseas call, add a
pause to the number.
Ask the recipient to make sure that
paper is loaded in their machine.
Resend the document if necessary.
Clear the document jam.
Check if the recipient's number is
correct or the telephone cable is
properly connected, and try again.
MODE RESULT
ECM NG
Action
11-20