Installation Procedure - Canon ImageCLASS MF4270 Starter Manual

• For Windows 2000/XP/Server 2003/Vista, logon as Administrator to install the software.
• On the screen shown at each step, click on the circled button to proceed.
• Make sure the machine is turned on.
(See "Connect the Power Cord and Turn On the Machine," on p. 10.)
• Make sure the network cable is connected to the machine.
(See "Connect the Machine to a Network," on p. 21.)
• Make sure an IP address is assigned to the machine.
(See "Checking the IP Address Setting," on p. 21.)

Installation Procedure

1
2
If the MF4200 Series CD-ROM Setup
screen is not displayed, click [start] on
the Windows task bar → [My
Computer].
Windows Vista: click [start] on the
Windows task bar → [Computer].
Windows 2000: double-click [My
Computer] on the Windows desktop.
Open the CD-ROM icon, then double-
click [MInst] ([MInst.exe]).
Before Installation
3
While installing the software on a
computer running Windows Server
2003, the display in this step does not
appear.
4
Software Settings with Computer
5
6
If the firewall is applied to the
operating system, the dialog box
below appears. Click [Yes] and
continue the installation.
23