Power Consumption - Carrier LENEL S2 Manual

5

Power Consumption

Model: LenelS2 Readers - 5000 Series
Standard 13.56 MHz with keypad
Standard 13.56 MHz with keypad
Standard 13.56 MHz without keypad
Standard 13.56 MHz without keypad
Standard 13.56 MHz/125 kHz with keypad
Standard 13.56 MHz/125 kHz with keypad
Standard 13.56 MHz/125 kHz without keypad
Standard 13.56 MHz/125 kHz without keypad
Standard 13.56 MHz/125 kHz SF/2F version with keypad
Standard 13.56 MHz/125 kHz SF/2F version with keypad
Standard 13.56 MHz/125 kHz SF/2F version without
keypad
Standard 13.56 MHz/125 kHz SF/2F version without
keypad
Slimline 13.56 MHz with keypad
Slimline 13.56 MHz with keypad
Slimline 13.56 MHz without keypad
Slimline 13.56 MHz without keypad
Slimline Economy 13.56 MHz without keypad
Slimline Economy 13.56 MHz without keypad
The above values are excluding heater consumption which is variable and depending on configu-
ration settings. Default value is 220 mA at 12 VDC but can be configured in 20 mA intervals
from minimum 120 mA to maximum 300 mA. When the heater is set in automatic mode, the
heater will be activated when the internal temperature of the reader is below +1°C, the heater will
automatically deactivate when the internal temperature exceeds +5°C.
Depending on the heater consumption setting the time it will take for the reader to exceed +5°C
will vary- a higher power consumption setting will reduce the time required to heat
the reader.
Current draw (idle) is defined as reader connected to power, no LED's lit, buzzer is
not sounding and no reading of credential or key pressing is processed by the reader.
Current draw (peak) is defined as reader powered with both backlight and LED frame lit (Yel-
low), buzzer is sounding and reader is reading a credential while simultaneously a key pressing is
processed.
Power Consumption
LED-Brightness
LED-Bar Backlight
Low Low
Medium Low
Low Low
Medium Low
Low Low
Medium Low
Low Low
Medium Low
Low Low
Medium Low
Low Low
Medium Low
Low Low
Medium Low
Low Low
Medium Low
Low Low
Medium Low
Current draw (idle)
12 VDC 24 VDC
50 mA 40 mA
50 mA 40 mA
50 mA 40 mA
50 mA 40 mA
90 mA 60 mA
90 mA 60 mA
90 mA 60 mA
90 mA 60 mA
90 mA 45 mA
90 mA 45 mA
90 mA 45 mA
90 mA 45 mA
50 mA 40 mA
50 mA 40 mA
50 mA 40 mA
50 mA 40 mA
35 mA N/A
35 mA N/A
Current draw (peak)
12 VDC 24 VDC
147 mA 99 mA
184 mA 116 mA
135 mA 94 mA
172 mA 111 mA
187 mA 119 mA
224 mA 136 mA
175 mA 114 mA
212 mA 131 mA
163 mA 91 mA
181 mA 94 mA
159 mA 89 mA
177 mA 92 mA
164 mA 108 mA
217 mA 135 mA
152 mA 103 mA
205 mA 130 mA
92 mA N/A
114 mA N/A