Table of Contents
Advertisement
10
Options for tamper alarm protection
The readers support both break off protection from the wall together with an opening
protection of the reader, to give extended protection for the installation.
If needed its possible to disable the break off protection with the red tray in the
accessory bag.
1.
Install the back plate on the wall with the supplied screws.
2.
Assemble the tamper alarm switch tray as shown in the picture.
3.
Remove the spring from the reader tamper alarm switch.
4.
Assemble the reader. Tamper alarm will be in normal state as long as the
reader housing is closed. If the reader is opened the tamper alarm is
activated.
Note that it is very important to remove the spring when the tamper switch tray is
used or otherwise you risk damaging the tamper alarm switch.
Hide quick links:
Advertisement
Table of Contents
