Tamper Switch Bracket (For Gangbox Socket) - Carrier LENEL S2 Manual

12
Tamper switch bracket (for gangbox socket), part no: LNL-R50000-TB
When installing reader on a installation box, use the recommended
horizontally aligned holes (as picture describes). If the tamperswitch
functionality should be used a installation box tamperswitch bracket
must be installed between the reader and the installation box.
Utilize screws supplied with the installation box but make sure to use a
screw and possible also washer with a maximum height of 2.8 mm and
a maximum diameter of 7.8 mm.