Scan To Folder Notification Messages; Scan To Folder Error Messages - Canon 08011-41-UD2-003 Installation And Configuration Manual

6.6.3

SCAN TO FOLDER Notification Messages

This section explains the SCAN TO FOLDER notification messages, along with
possible causes and remedies.
Message
Checking access to [share]
share...
Validating File Server and
File Path...
6.6.4

SCAN TO FOLDER Error Messages

This section explains the SCAN TO FOLDER error messages, along with possible
causes and remedies.
Message
Specified share is
inaccessible. Please enter
or select another.
Home Directory is not
configured. Contact
administrator.
No share is pre-selected.
Contact administrator.
No share can be selected.
Contact administrator.
176 Authorized Send Installation and Configuration Guide for imageRUNNER Machines
Cause
The MEAP device is attempting to
acquire sufficient read privileges.
The MEAP device is validating
correct formatting of the file server
and file path.
Cause
The MEAP device cannot acquire
sufficient read privileges to the
specified file path on the specified
file server.
The [Scan to Home
Directory/Preselected Share only]
check box is selected in the
Configuration servlet, and the user
has no Home Directory configured
in Active Directory.
The [Scan to Home
Directory/Preselected Share only]
check box is selected in the
Configuration servlet, and no
preselected share is selected from
the Preselected Share drop-down
list.
The [File Server/Path] and
[Browse] check boxes in the
<Disabled> column are selected in
the Configuration servlet, and no
preset shares have been created.
Remedy
Not applicable.
Not applicable.
Remedy
Verify that the share exists
and that sufficient privileges
have been configured.
• Verify that the user has a
Home Directory configured
in Active Directory, or
• Clear the check mark from
the [Scan to Home
Directory/Preselected
Share only] check box.
• Select or configure a
preselected share in the
Configuration servlet, or
• Clear the check mark from
the [Scan to Home
Directory/Preselected
Share only] check box.
• Create a preset share in the
Configuration servlet, or
• Clear the check marks from
the [File Server/Path] and
[Browse] check boxes in
the <Disabled> column.
See "Configuring Scan to
Folder Settings," on p. 100.